Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Dryflex® V 80A101 - TPV - Hexpol TPE

Material Data Center offers the following functions for Dryflex® V 80A101:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Dryflex V datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
기계적 특성단위시험규격
ISO 데이터
인장 강도 8 MPa ISO 37
파단시 신율 600 % ISO 37
23 C, 영구 압축줄음율, 24h 31 % ISO 815
70 C, 영구 압축줄음율, 24h 41 % ISO 815
100 C, 영구 압축줄음율, 24h 48 % ISO 815
전단강도 32 kN/m ISO 34-1
기타 특성단위시험규격
밀도 970 kg/m³ ISO 1183
Processing Recommendation Injection Molding단위시험규격
성형온도 15 - 50 °C -
Feed temperature 160 - 190 °C -
Zone 1 170 - 200 °C -
Zone 2 180 - 210 °C -
Zone 3 190 - 220 °C -
특징
생산 공정
사출 성형, 기타 압출, 중공 성형
특별 특성
U.V. 안정성 또는 기후 안정성
특성
Fatigue Resistance, Good Adhesion
내화학성에
Oil Resistance
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.